Issue Inspection Certificate,Declaration of Conformity and Type Aproval Test
Testing and Inspection of Bonding/Grounding systems
The proper installation of bonding and grounding devices is important in the protection of personnel and equipment. At the time of installation a resistance test is needed to confirm electrical continuity to ground. In addition, an effective inspection and maintenance program is needed to ensure continuity adequacy of the system.
Building information modelling (BIM)
The BIM concept involves the virtual construction of a facility prior to its actual physical construction, in order to reduce uncertainty, improve safety, work out problems, and simulate and analyse potential impacts.
Energy Audit Tool
Undertaking deep energy retrofits of existing buildings can reduce energy use by more than 50%, yet building owners remain uncertain of how to evaluate which improvements to make and what saving will result. Despite the proliferation of a wide variety of energy audits and surveys, no industry standard for concise, accurate energy audits currently exists.
Fire and Explosion-proof Equipment
Fire-proof door,Anti-explosion door,Security Door,Fire-proof glass,Fire-proof walls
What is the difference between Pressure resistant and Blast resistant doors?
Seated pressure loading acts to seat the door into the frame against the stops. Unseated pressure acts to unseat the door away from the stops where hardware is an integral part of the pressure resistance. This is an important consideration in the design of both pressure resistant and blast resistant doors and it has lead to the design of special hinges and locking devices.
Blast Standard Test Methods and Design Criteria
3.1 ASTM F2247 – Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method) – Determines ultimate static capacity. Requires further evaluation to relate to explosive charges or other dynamic loads
3.2 ASTM F2927 – Standard Test Method for Door Systems Subject to Airblast Loadings – Used to determine blast capacity for a shock wave created by live explosives or a shock tube.
3.3 ASTM F2912 – Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings – Used to determine blast capacity from a shock wave or explosion
3.4 ASTM F1642 – Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings – The data obtained from this test method is used in ASTM F2912 to determine a hazard rating.
3.5 GSA-TS01-2003 – Standard Test Method for Glazing and Window Systems Subject to Dynamic Overpressure Loadings – The sole test protocol by which blast resistant windows and related hazard mitigation technology and products shall be evaluated for facilities under the control and responsibility of the US General Services Administration.
3.6 ASCE 2010, 2nd edition – Design of Blast Resistant Buildings in Petrochemical and Offshore Facilitie
3.7 PIP STC01018 – Blast Resistant Building Design Criteria for Petrochemical and Offshore Facilities
3.8 UFC 4-010-01 – Department of Defense Minimum Antiterrorism Standards for Buildings – The intent is to minimize mass casualties in buildings or portions of buildings owned, leased, privatized, or otherwise occupied, managed, or controlled by or for DoD in the event of a terrorist attack.
Ind-expocertification is Members of the U.S. Green Building Council (USGBC) with Membership Code:iec20182018
What is LEED?
LEED (Leadership in Energy and Environmental Design) is an internationally recognized green building certification system, providing third-party verification that a building or community was designed and built using strategies aimed at improving performance across all the metrics that matter most: energy savings, water efficiency, CO2 emissions reduction, improved indoor environmental quality, and stewardship of resources and sensitivity to their impacts.
Developed by the U.S. Green Building Council (USGBC), LEED provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions.
